Hypertronics Connectors
Shielded HyperGrip® Push/Pull Circular Plastic Connectors
As more sophisticated digital medical equipment enters the market, and data transfer rates continuously increase, the use of shielded connectors will be required to protect medical device circuitry from harmful electromagnetic (EMI) and radio frequency interference (RFI). The connectors provide shielding up to 3 GHz with an attenuation of 50dB. The shielding feature provides EMI/RFI protection from the shielded cable through to the device. Shielded HyperGrip® plug connectors offer a minimum of 15,000 mating cycles and have a current carrying capacity of one amp per contact. They are also shock and vibration resistant and are self cleaning.
The HyperGrip offers unparalleled performance of the Hypertac® contact technology, known for providing high cycle life, low contact resistance, low insertion force, reliability under extreme conditions, maximum contact performance, and excellent wiping action. HyperGrip is ideal for a variety of critical applications including portable ultrasound devices, digital X-Ray sensors, patient monitors, a variety of therapeutic devices and integrated imaging systems, where dependability is critical.
- Shielding - EMI/RFI protection
- Push/Pull latching designs - simple, one hand disconnect
- Customer Keyable - easily keyed in one of the six different standard keying positions to prevent mismatching, which could result in catastrophic consequences
- Aesthetic design - softly shaped and easy to clean
- Color coding - available in 5 colors to provide visual indication for efficient mating
- Integrated strain relief available - prevents cable wire fatigue due to bending
- Front or rear panel mount receptacle design - option to mount the harness assembly from inside or outside the device enclosure
- Recessed contact tails - protect wire terminations
- Fingerproof
- Crimp and solder cup contact terminations
- More...
Download Shielded HyperGrip Catalog Pages
_______________________________________________________________________________Rectangular Connectors:
Hypertronics cPCI 2MM Connectors
The Hypertronics cPCI 2mm connector system is based on the legendary Hypertac contact technology, which is known for its’ immunity to shock and vibration fretting. Tested to military standards, the Hypertronics cPCI 2mm connector delivers the highest performance in a ruggedized CompactPCI format for all mission critical applications such as military land systems, shipboard, and aerospace
- Interchangeable with cPCI COTS Systems
- Immune to shock and vibration fretting
- High-temp LCP insulator meets NASA outgassing requirements
- Reverse Gender to Commercial 2mm Products
- Keying feature ensures proper mating
- Shield prevents EMI/RFI
Download cPCI (2mm) Catalog Pages
_________________________________________________________________________
Hypertronics KA Connectors
Hypertronics KA series come in 2 – 5 row configurations designed with the legendary Hypertac Hyperboloid Technology. The 2 and 3 row series are MIL-DTL-55302 QPL'D and offers flexibility not available with other interconnects. The KA series was designed as printed circuit board connectors offering pin counts from 17 to 490 contacts.
- Hypertronics HyperSpring® spring loaded contacts, self-cleaning wiping action
- Combine robust environmental performance with compact size and light weight
- Easy and fast snap on locking mechanism
- Full line EMI shielding
- IP67 sealing when mated and unmated
Download KA 2-3 Row Catalog Pages
_________________________________________________________________________
Hypertronics LSH Connector
The LSH Rack & Panel Connector is used in many market segments such as aerospace, automotive, industrial, test & measurement, and mass transit. Made with the superior Hypertac contact technology, these connectors offer the ability to withstand shock & vibration fretting, with low insertion / extraction forces for easy mating. The Hypertronics LSH connector maintains its life cycle for 100,000+ mating cycles for an extremely low cost of ownership. Some of the additional features of the LSH connector include:
- 2mm centerline, 4 X 30 contact grid (120 total contact positions) Up to 1 Amp per contact
- Insulator material meets NASA outgassing specifications/li>
- Radial float .049” (1.25mm)
- Threaded terminals
- One row (.925” (23.50mm) centers
_________________________________________________________________________
Hypertronics KGA Series Connectors
Hypertronics KGA Series connectors are high density, PCB connectors available in two styles:
- plug (with pins) to receptacle (with sockets)
- pin carrier (bed of nails) to receptacle (with sockets).
The connector can be configure with pin counts from 4-90 and carry a current rating of 2.5A.
- Parallel board connectors
- Ø.018” (0.45mm) pins
- Two rows on 0.100” (2.54mm) x 0.100” (2.54mm) centers
- Alignment pins and keying hardware available
Download KGA Series Catalog Pages
________________________________________________________________________________
Hypertronics Modular Connectors
Hypertronics L&N series high density modular connectors include several new modules including Coax and High Current contacts up to 200 amps, as well as the patented Hot Plug contact. The modular building block system enables custom connectors with large numbers of contacts to be configured into a single frame. This allows the user to select the connector that fulfils the exact requirements with off the shelf components and shortened lead times.
Hypertronics L&N series connectors are used in the most demanding of applications where the environment demands durability, ruggedization and extended operating life.
L Series Power Connector
- Mixed signal, power, and coaxial modules
- Provides up to 200 amp power
- Cable to chassis and rack & panel
- Plastic backshell with strain relief
- Float mountable for blind mating
Hypertronics N Series High Density Connectors
- Provides 20-765 signal contacts in single
- Removable signal and coax
- Cable to chassis, cable to cable, rack & panel
- Metal backshell with adjustable cable clamp
- Float mountable for blind mating
Download the L & N Series Connector Product Review Sheet
_________________________________________________________________________
VME64x - Ruggedized Connectors
The Hypertronics ruggedized VME64x interconnect solution comprises optimized contact lead traces to provide superior performance in high-speed signal applications.
- COTS and Custom Applications
- Mechanically compliant with IEEE-1101.2 -1992, ruggedization level 5
- Stackable design of high speed
- Designed for severe environment applications with high levels of shock and vibration
- Optimized lead traces within modules provide superior performance in high speed applications
- Aluminum frames for ruggedness and conduction cooling
_________________________________________________________________________
Hypertronics Circular Connectors
Hypertronics HyperRel Connectors
Hypertronics now offers ruggedized connectors that are intermateable with MIL-C-38999 Series III connectors. HyperRel is built upon the legendary Hypertac contact technology which outperforms other interconnect options in terms of performance reliability, number of mating cycles, contact forces, contact resistance and value. The Hypertronics Metal (HRM) connector series offers the maximum in vibration, shock and EMI resistance. A general duty threaded connector; the HRM series offers thicker wall sections and greater coupling surface with 100% metal-to-metal bottoming, a superior anticoupling system and a proven dielectric contact retention.
The positive metal-to-metal coupling design, superior interfacial seals, and cadmium over nickel plating provide excellent EMI, moisture and corrosion resistance. Elongated mounting holes permit the HRM connector to intermount with existing standard MS/38999 box or wall mount receptacles, giving it a design replacement advantage. The Hypertronics HRC Composite connectors eliminates the largest contributing factor in advanced systems malfunctionà corrosion, which is the main cause of mechanical, electrical, and electromagnetic connector degradation. Electromotive force differentials between many dissimilar metals found in connectors and accessories produce galvanic action. The Hypertronics HRC connector eliminates these dissimilar metals resulting in an interconnection system that withstands over 2000 hours of salt spray.- Intermateable with MIL-C-38999 Series III connectors
- High shock and vibration resistance
- 100% metal to metal bottoming
- Hypertronics / Hypertac style 39029 contacts
- Triple start, self locking, threaded coupling
Download HyperRel Catalog Pages
_______________________________________________________________________________
HYPERTRONICS D Series Connectors
recognized components File No. 102195 - High impact polycarbonate or ULTEM body
- High temperature versions available (+125° C)
- Quick disconnect push button release
Download D Series Catalog Pages
