Sabritec Connectors
Sabritec Ultraminiature Triax Connectors
The series includes straight and right angle cable mount and PCB mount connectors, in-series and between series adapters, as well as coax/triax transitional adapters, bulkhead receptacles and cable-bus terminators. Cable mount connectors are designed for all types of data-bus and video interconnect systems including MIL-STD-1553B, ARINC 429, 100 Base-T Ethernet, high speed video hot-link and fibre channel data links.
_________________________________________________________________________
Sabritec Passive Equalization Technology (Patent Pending)
The robust ‘user-transparent’ device will extend the reach of high speed digital signals without using any system power or pc board real estate. It is intended for use in high speed (>2Gb/s) 100 Ohm differential interconnects. The unique design helps to offset those high frequency losses endemic to high speed digital interconnect paths that are primarily dispersive in nature.
• Up to 50% increase in high-speed signaling cable length
• Up to two times increase in data rate for given interconnect length
• Improve the margin at the receiver end for a given signal performance
• Re-use existing wire and cable to drive higher data rate signals
• Entirely passive (no extra power required)
• Self contained in the contact no board real estate used
• Applicable over a wide range of data rates and transmission types• More...
_________________________________________________________________________
Sabritec Duraspeed Quadrax/Twinax Contacts
Sabritec’s Duraspeed line offers true differential pair matched impedance Twinax and Quadrax contacts, where the differential pair and signal to shield impedance is maintained throughout the connector pair, with rugged low insertion force/high mating cycle precision contacts capable of withstanding a minimum of 6,000 mating cycles. All Duraspeed Quadrax (DSQ) and Twinax (DST) contacts are designed to fit Sabritec's standard cavities for all existing connector formats of high speed product lines of MIL-DTL-38999, ARINC 600 and Rugged-Subminiature. More...
_________________________________________________________________________
Sabritec ARINC 801 Terminus
The ARINC 801 fiber optic terminus is the next generation of high density, butt joint interconnect technology. With its standard 1.25 mm ferrule and sleeve, the ARINC 801 terminus is designed for both multimode and single-mode applications and is compatible with standard LC termination processes. The terminus is available both as a pull-proof design and as an optical disconnect style. More...
_________________________________________________________________________
Sabritec IP67 Watertight Connectors
Sabritec has developed water resistant connectors that can be successfully used in systems where moisture, humidity, water and dust are present. Our Sabritec design method is capable of sealing up to 35 psi in the unmated, open faced condition. These connectors are ideal for high-pressure/low leakage applications in land, air, sea, and space environments. The water resistant connector features can be added to both filtered and non-filtered multipin connectors, coaxial, triaxial and high speed connector types. More...
_________________________________________________________________________
Sabritec Filter Connectors
Sabritec offers filter composite connectors for MIL-DTL-38999 Series III. The filter composite materials can resist severe corrosion of up to 2000 hrs of Salt Spray. Using composite filter connectors can help increase durability up to 1500 cycles. Filter composite connectors have magnetic permeability that meet all applicable MIL-DTL-38999 requirements. These connectors are ideal for power management systems, video processing equipment, and military fighter jets. Available in nickel and cadmium plated versions. Filter connectors are available with transient and EMI suppression. These connectors conform to the applicable military specifications
and standards for materials and mechanical form, fit, and function. All of Sabritec's filter connectors will mate with non-filter connectors and in most cases are interchangeable.
• All shell sizes and contact layouts for MIL-DTL-38999 series
• Composite materials resist severe corrosion up to 2000 hrs of salt spray
• Nickel, electroless nickel and cadmium plated versions
• Increased durability (up to 1500 cycles) with composite materials
• Magnetic permeability meets all MIL-DTL-38999 requirements
_________________________________________________________________________
Sabritec High Density Miniature Circular Connectors
Sabritec's new High Density Miniature Circular Connectors (HDMC) series offers the performance of a MIL-DTL-38999 connector in a smaller size with significant weight savings. The HMDC is offered with Size 23 crimp removable contacts, Size 12 High Frequency Coax (MDHC) contacts, Size 10 High Speed Twinax and rugged Fiber Optic signaling. More...
- Meets or exceeds electrical and environmental performance criteria for MIL-DTL-38999 style connectors
- Shell size 7 offers 10 Crimp Removable Size 23 Crimp contacts or 1 Size 12 MDHC high frequency coax contact
- Greater than 50% space saving compared to MIL-DTL-38999 Shell Size 9
- Increased signal density by 40% compared to MIL-DTL-38999 Shell Size 9
- Offers 70% in weight reduction compared to MIL-DTL-38999 Shell Size 9
- Compatible with industry standard backshells
- Various styles and features to suit a wide variety of applications
_________________________________________________________________________
Sabritec High Power Connectors
Sabritec’s High Power connectors utilize the superior performing Hyperboloid® contact technology, ideal for harsh and demanding environments with low contact resistance. These connectors provide high current ratings with smaller contacts for the same power thus saving overall weight and space.
Key Features:
- Low coupling force
- Improved low rate of wear and high coupling durability
- Shock and vibration resistance
- Operate in harsh environments
- Increased power handling capability by 25% as compared to standard contacts
- Reduced contact resistance
- Contact elements can be insulated, to enable multi-pole use (coaxial)
- Contact mating sequence can be used to gain benefits such as power switching
- Mating of shorter contact can energize main power for system or safety requirements
Click below for:
Sabritec High Power Specification Sheet
_________________________________________________________________________
Click below for more information about Sabritec:
